ZTE ZXA10 C600 Description:
ZTE ZXA10 C600 OLT is a 19-inch, 11U height unified platform with 17 service slots that supports multiple access technologies including GPON, XG-PON, XGS-PON, Combo PON, 10G-EPON and GE P2P, as well as smooth migration to 50G PON, and provides L2 switch, VLAN service, L3 routing protocol and service processing capabilities, supporting flexible configurations and suits multiple application scenarios. This OLT comes chassis with 2xcontrol board, 8x10GE uplink, 2xDC power board and 2PCS DC power cables, 1PCS earth cable.
ZTE ZXA10 C600 OLT Product Features:
- The most advanced hardware architecture
- The control plane is separated from the forwarding plane, the active and standby control planes are redundant, and the forwarding plane is dual-switching plane load sharing.
Support ISSU and NSR, upgrade, switch 0 interrupt.
Supports TDM-like forwarding channels, which can meet the ultra-low latency fronthaul requirements of 5G uRLLC services. - The industry’s highest capacity
The industry’s highest switching capacity and slot bandwidth.
Compatible with multiple generations of PON access technologies and multiple technical directions.
- SDN, AO/CO reconstruction
Support Netconf/YANG, smooth evolution of SDN.
Support network slicing.
Supports built-in blades and can be used as NFVI for deploying experience-sensitive services.
- The industry’s first three-in-one Combo PON
Specifications:
| Brand | ZTE |
| Model | C600 |
| Switching capacity of backplane bus (Tbit/s) | 14 |
| System switching capacity (Tbit/s) | 7.2 |
| Switching capacity of system layer 2 packet forwarding rate | Distributed unblocked forwarding |
| Switching card switching capacity | 3.6 Tbit/s (single switching board SFUL/SFULV/SFUH/SFUHV) |
| Switching and forwarding delay | Upstream: ≤1500 μs |
| Downstream: ≤100 μs | |
| Full load bit error rate | 10 e-9 (full load transmission) |
| Dimensions (mm) | 486.1 (H) × 482.6 (W) × 288.5 (D) |
| Weight(kg) | 18 (empty) |
| <52 (full configuration |
Specifications:
| Brand | ZTE |
| Model | C600 |
| Switching capacity of backplane bus (Tbit/s) | 14 |
| System switching capacity (Tbit/s) | 7.2 |
| Switching capacity of system layer 2 packet forwarding rate | Distributed unblocked forwarding |
| Switching card switching capacity | 3.6 Tbit/s (single switching board SFUL/SFULV/SFUH/SFUHV) |
| Switching and forwarding delay | Upstream: ≤1500 μs |
| Downstream: ≤100 μs | |
| Full load bit error rate | 10 e-9 (full load transmission) |
| Dimensions (mm) | 486.1 (H) × 482.6 (W) × 288.5 (D) |
| Weight(kg) | 18 (empty) |
| <52 (full configuration |
ZTE ZXA10 C600 OLT and Related Service Boards:
| GPON | XG-PON | XGS-PON | XG-PON and GPON Combo | XGS-PON and GPON Combo | Port | ||
| ZTE | C300/C320/C350 | GTGO | GTXO | GTTO | GTBO | 8 | |
| GTGH | 16 | ||||||
| C600/C650/C680 | GFGH | GFXH | GFTH | GFBN/GFBH | GFCH | 1 |
