Fiber Power Feeder Clamp Description:
This Fiber Power Feeder Clamp is a sort of module assembly for fixing cables. It’ s made of resist ultraviolet and enduring high temperature material. It fits for fixing the circular fiber cable of φ7mm orφ7.5mm and 3.3 square, 4 square, 6 square, 8.3 square cable. It can set three fiber cables and three cables in most. The C-shape bracket is light and terse and It’ s easy to fix reliably.
Besides, it can offer a combined solution for power cables (DC) and fiber optic cables (FO). This clamp is very effective and flexible when fixing different size of DC power cables.
Fiber Power Feeder Clamp Features:
- The clamp is designed to secure 2 to 6 fiber cables and power cables
- It is installed on cable ladder, rung, bracket, i-beam, profile such as towers, ladders and masts at telecom site
- Without additional adapters, provide sturdy, reliable, long-term support
- Provide various fiber cable and power cable with rubber insert
- Each block holds two runs of cable to reduce installation cost
- Easy-to-install
- Wind loaded
- UV and corrosion resistant with SUS304 bracket
- Capable to working in extreme temperature
Product Specifications:
|
Clamp type
|
European standard
|
Cable Type
|
Power (hybrid) cable and fiber cable
|
|
Size
|
OD 12-22mm DC power cable
OD 7-8mm fiber cable |
Number of Cables
|
3 power cable + 3 fiber cable
|
|
Operation Temp
|
-50 °C ~ 85 °C
|
UV Resistance
|
≥1000 hours
|
|
CompatibleMax Diameter
|
19-25mm
|
Compatible Min Diameter
|
5-7mm
|
|
Twin Plastic Clamps Material
|
Fiberglass reinforced PP,Black
|
Metal Material
|
Stainless steel 304 or hot galvanized
|
|
Mounting On
|
Steel wire cable tray
|
Max Stack Height
|
3
|
|
Vibration Survival
|
≥4 hours at resonant frequency
|
Environmental Strength Cap
|
Double cable weight
|
-
Quantity(pieces) 1 – 500 >500 Lead time (days) 10 To be negotiated
This Fiber Optic Cable Clamp is widely used for :
* Telecom cable
* Fiber cable
* Coaxial cable
* Feeder cable
* Hybrid cable
* Corrugated cable
* Smooth cable
* Braid cable
* Telecom cable
* Fiber cable
* Coaxial cable
* Feeder cable
* Hybrid cable
* Corrugated cable
* Smooth cable
* Braid cable
1. Disentwine the special bolt of the C-bracket till the ringent distance is bigger than the thick of one
side of angle iron. And then tighten the special bolt M8; (Reference torque: 15Nm)
2. Please retire the nut onto the threaded rod ,and unclench the plastic clip;
3. Disjoin the plastic clamp,plunge the Fiber cable ofφ7mm orφ7.5mm into the small hole of plastic
clamp, plunge the 3.3 square or 4 square cable into the hole of the black rubber pipe in plastic clamp.
Remove the rubber pipe from the plastic clamp for the 6 square or 8.3 square cable and plunge the
cable into the hole of plastic clamp (figure right);
4. Lock all nuts at last. (Reference torque of lock nut M8 for clamp: 11Nm)
side of angle iron. And then tighten the special bolt M8; (Reference torque: 15Nm)
2. Please retire the nut onto the threaded rod ,and unclench the plastic clip;
3. Disjoin the plastic clamp,plunge the Fiber cable ofφ7mm orφ7.5mm into the small hole of plastic
clamp, plunge the 3.3 square or 4 square cable into the hole of the black rubber pipe in plastic clamp.
Remove the rubber pipe from the plastic clamp for the 6 square or 8.3 square cable and plunge the
cable into the hole of plastic clamp (figure right);
4. Lock all nuts at last. (Reference torque of lock nut M8 for clamp: 11Nm)
