This cable clamp is a sort of module assembly for fixing cables. It’ s made of resist ultraviolet and enduring high temperature material. It fits for fixing the circular fiber cable of φ7mm orφ7.5mm and 3.3 square, 4 square, 6 square, 8.3 square cable. It can set three fiber cables and three cables in most. The C-shape bracket is light and terse and It’ s easy to fix reliably.
Besides, it can offer a combined solution for power cables (DC) and fiber optic cables (FO). This clamp is very effective and flexible when fixing different size of DC power cables.
|
Clamp type
|
European standard
|
Cable Type
|
Power (hybrid) cable and fiber cable
|
|
Size
|
OD 12-22mm DC power cable
OD 7-8mm fiber cable |
Number of Cables
|
3 power cable + 3 fiber cable
|
|
Operation Temp
|
-50 °C ~ 85 °C
|
UV Resistance
|
≥1000 hours
|
|
CompatibleMax Diameter
|
19-25mm
|
Compatible Min Diameter
|
5-7mm
|
|
Twin Plastic Clamps Material
|
Fiberglass reinforced PP,Black
|
Metal Material
|
Stainless steel 304 or hot galvanized
|
|
Mounting On
|
Steel wire cable tray
|
Max Stack Height
|
3
|
|
Vibration Survival
|
≥4 hours at resonant frequency
|
Environmental Strength Cap
|
Double cable weight
|
This Fiber Optic Cable Clamp is widely used for :
* Telecom cable
* Fiber cable
* Coaxial cable
* Feeder cable
* Hybrid cable
* Corrugated cable
* Smooth cable
* Braid cable
* Telecom cable
* Fiber cable
* Coaxial cable
* Feeder cable
* Hybrid cable
* Corrugated cable
* Smooth cable
* Braid cable
1. Disentwine the special bolt of the C-bracket till the ringent distance is bigger than the thick of one
side of angle iron. And then tighten the special bolt M8; (Reference torque: 15Nm)
2. Please retire the nut onto the threaded rod ,and unclench the plastic clip;
3. Disjoin the plastic clamp,plunge the Fiber cable ofφ7mm orφ7.5mm into the small hole of plastic
clamp, plunge the 3.3 square or 4 square cable into the hole of the black rubber pipe in plastic clamp.
Remove the rubber pipe from the plastic clamp for the 6 square or 8.3 square cable and plunge the
cable into the hole of plastic clamp (figure right);
4. Lock all nuts at last. (Reference torque of lock nut M8 for clamp: 11Nm)
side of angle iron. And then tighten the special bolt M8; (Reference torque: 15Nm)
2. Please retire the nut onto the threaded rod ,and unclench the plastic clip;
3. Disjoin the plastic clamp,plunge the Fiber cable ofφ7mm orφ7.5mm into the small hole of plastic
clamp, plunge the 3.3 square or 4 square cable into the hole of the black rubber pipe in plastic clamp.
Remove the rubber pipe from the plastic clamp for the 6 square or 8.3 square cable and plunge the
cable into the hole of plastic clamp (figure right);
4. Lock all nuts at last. (Reference torque of lock nut M8 for clamp: 11Nm)
Reviews
There are no reviews yet.