FiberHome AN5116-06B Overview
The FiberHome AN5116-06B is a new intelligent carrier-class MSAN / GPON / 10G PON integrated access product. It is being used and works in conjunction with remote end ONUs (Optical Network Unit) as office end OLT (Optical Line Terminal) in MSAN / GPON / 10G PON system. Also, it supports integrated broadband / narrowband services, such as POTS / ADSL2 + / VDSL2 / VoIP / TDM / data / IPTV / CATV. Converge Layer 2 and Layer 3 data.
There are 3 different sizes of equipment to meet different application scenarios:
- Large-capacity device: AN5516-01/AN5116-06B
- Medium-capacity device: AN5516-06
- Small-capacity device: AN5516-04
Providing 16 service slots, the AN5116-06B is large-sized optical line terminal equipment deployed in a central office. Featuring a large capacity and high bandwidth, the equipment can cater to the access demand in a densely-populated area.
Bundle combination
Control and uplink board | Power supply board | Uplink board | Pon board | |||
HSWA/HSWB: Slot bandwidth: 10G;Switch capacity: 488Gbit/s |
PWR-A/PWR-B:
DC power board, 2 pieces equipped |
HU1A / HU1B: 4GE+1*10GE | HU2A: 2GE+2*10GE | GCOB/ECOB | XP4A | XPOA |
HSWD: Slot bandwidth: 40G;Switch capacity: 1.92Tbit/s |
HU2C: 4GE+2*10GE | HU2K: 2GE+2*10GE | GC8B/EC8B | XP8A | XG8A |
Quick Specs
Super Access Ability | High capacity and Density carrier-class GPON platforms supporting 256 GPON ports or 64 XGPON ports switch card capacity of 3.84T, and backplane bus capacity of 5.12T |
Support 6*GE /1*10GE + 4*GE/ 2*10GE + 2*GE/4*10GE(optical or electrical). | |
Support STM-1/E1 private uplink interface and up to 16×16GE downlink P2P interfaces. | |
It has the capability to support a split-ratio of 1:32/64/128 long haul transmission and CLASS C+ optical module. | |
Multi-service Access | Provide Internet/ Voice/ IPTV/ CATV/ TDM services. |
Support IEEE 1588v2 protocol and 1PPS+TOD Clock interface. | |
Support OSPF, VRRP, and RIP L3 protocols. | |
Unified platform of MSAN/GPON/10G PON/P2P for FTTX Smooth evolution. | |
High-Reliability Optimization Design | Standard 19” inches cabinet supporting 16 service slots. |
Full front card and front access design. | |
Support hot plug for all cards and PON modules. | |
Support redundancy error-check protection for services, controller and uplink cards. | |
End-to-end protection, uplink ports RSTP/LACP protection and downlink PON port millisecond-level switch protection | |
Green Energy | The overall power consumption is lower than the average industry level |
Use the high-performance and low power consumption chip. | |
8-level intelligent temperature control fan and support idle ports sleeping mode and energy saving. |
FiberHome AN5116-06B Datasheet
Item | FiberHome AN5116-06B |
Slot configuration | Two slots for core switch cards (slots 9 and 10) 16 slots for service cards (slots 1 to 8 and 11 to 18) Two slots for uplink cards (slots 19 and 20) Two slots for vectoring cards (slots 8 and 11) |
Slot bandwidth | HSWA / HSWB: 10G HSWD: 40G |
Switch capacity of the backplane bus | 3.76 Tbit/s |
Switch capacity of core switch cards (in the load sharing mode) | 488 Gbit/s (when the HSWA / HSWB card is configured) 1.92 Tbit/s (when the HSWD card is configured) |
Maximum number of MAC addresses in the system | HSWA / HSWB: 32K HSWD (2202258): 128K HSWD (2201069): 288K |
Maximum number of IPv4 routing tables in the system | HSWA: 8K HSWD (2201069): 128K HSWD (2202258): 64K |
Maximum number of IPv6 routing tables in the system | HSWA: 4K HSWD (2201069): 64K HSWD (2202258): 32K |
Maximum number of ARP tables in the system | 8K |
Maximum number of multicast groups in the system | HSWA / HSWB: 8K HSWD: 16K |
Maximum number of 10G G/EPON ports in the system | 128 |
Maximum number of XG-PON ports in the system | 128 |
Maximum number of GPON & XG-PON Combo ports in the system | 128 |
Maximum number of GPON & XGS-PON Combo ports in the system | 128 |
Maximum number of Ethernet ports in the system | 256 GE optical / electrical ports |
Operating temperature | Long term: 0℃ to 45℃ Short term: -5℃ to 55℃ |
Rated voltage | -48 V |
Working voltage range | -40 V to -56 V |
Power supply mode | DC |
Maximum input current | 63 A |
Dimensions of a subrack with mounting ears for 19-inch cabinets (H × W × D) | 471.7 mm × 480.8 mm × 262.7 mm |
Weight of an empty subrack | 13.9 kg |