Support MU-MIMO and OFDMA technologies have greatly improved the efficiency of Wi Fi networks. Excellent WiFi performance
Hardware Specification
Product features:
- Support for Most of poplular OLT including ZTE Huawei Fiberhome Nokia OLT etc.
- accord with H.248, MGCP, and the SIP protocol standards
- Compliance with the 802.11 n / b / g / ac protocol standards
- Support the Ethernet business second floor exchange and up and down business line speed forwarding
- Support for frame filtering and suppression
- Support standard 802.1Q Vlan functionality and support VLAN conversion
- Support for 4,094 VLAN’s
- Support for the dynamic bandwidth allocation function
- Support for PPPOE, IPOE, and Bridge services
- Support for QoS, including business flow classification, priority marking, queuing and scheduling, flow shaping, and traffic control
- Support for IGMP Proxy and IGMP Snooping
- Support Ethernet port speed limit, loop detection, second floor isolation
- Support power failure alarm
- Support for the remote reset and restart function
- Support the recovery of the factory parameters function
- Support data encryption
- Support the status detection and fault reporting function
- Support power protection
Port features:
- PON: connected to the source OLT device via optical fiber cable
- Ethernet port: connected to the user side equipment through twisted pair network wire, LAN1-LAN4 port rate is 10 / 100 / 1000M adaptive, Telephone port: connect to the user-side equipment through the telephone line
- Reset button: restart the device; hold down for more than 3 seconds, the system will restore the factory default
- WIFI button: no line is turned on / off by the function
- WPS button: WPS is used to simplify security and network management for Wi-Fi wireless, Wi-Fi protection settings, you can depending on the client Support, choose the appropriate mode
- LED button: The LED indicator light is on / off
- Power switch: power supply on / off
- Power interface: connect with external power supply
Optical characteristics:
- 1. Support wave division multiplexing technology single fiber bidirectional (single fiber three-way) transmission
- Interface type: SC / UPC
- Maximum spectroscopic ratio: 1:128
- Rate: 1.25Gbps, 2.5Gbps
- Send wavelength: 1310 nm
- Receive wavelength: 1,490 n m
- Output optical power: -1~ + 4dBm
- Receive sensitivity: <-27dBm
- The longest distance between OLT and ONU supports 20 km
Physical characteristics:
- Power supply: 12V / 1A
- Operating temperature: -10~60ºC
- Storage temperature: -20~80ºC
- Case Specification: 250 * 170 * 35 MM
- Weight : 320g
For more: Click here
Reviews
There are no reviews yet.