EchoLife Huawei HG8240H:
The Huawei HG8240H is a bridging-type ONT used in the Huawei all-optical access solution. It implements ultra-broadband access through the GPON technology.
It provides 4 GE ports and 2 POTS ports. The high-performance forwarding capability ensures the service experience of voice, data and HD video services, and provides users with ideal terminal solutions and future-oriented service support capabilities.
Main Attributes of Huawei HG8240H:
- 4 Gigabit Ethernet ports
- 2 telephone ports (POTS)
- SIP and H.248 audio protocols
- Multicast routing
- Remote and local configuration possible (OMCI/Graphical interface)
- IPv4/ IPv6 dual stack
- NAT, transmission at 900 Mbps
Features:
- Plug and play: Configurations are automatically provided by the network management system, so there is no need to run on-site.
- Remote Diagnosis: POTS ports support loop tests and call simulation tests, implementing remote error localization. It supports remote batch updates, and up to 2000 devices can be updated on an hourly basis.
- Link monitoring: OAM Ethernet based on IEEE 802.1ag, which implements comprehensive link detection (E2E) and network isolation.
- Energy saving: SOC chips are highly integrated. Each chip integrates PON, voice, gateway and LSW modules for up to 25% energy savings.
Technical specification
| Interfaces | |
| GPON | Class B+ Sensitive reception: -27 dBm Wavelength: US 1310 nm, DS 1490 nm Authentication via serial number, password or serial number + password Flexible mapping between the GEM port and the TCONT port |
| Ethernet | 4 ports 10/100/1000BASE-T (RJ45) |
| POTS | 2 x SIP port H.248 |
| Connection type | GPON (SC/ UPC) |
| Physical characteristics | |
| Dimensions | 176 mm x 138.5 mm x 28 mm |
| Weight | 240 g |
| Permissible operating temperature | 0 to 40 degrees C |
| Permissible air humidity | 5% – 95% RH, non-condensing |
| Power input | 100 – 240 V AC, 50 – 60 Hz |
| System power supply | 11 – 14 V DC, 1 A |
| Static power consumption | 4 W |
| Maximum power consumption | 7.8 W |
| LEDs | POWER/ PON/ FATE/ LAN/ TEL |
| Functionality | |
| Multicast features | IGMP Snooping v2/ v3 Dynamically controlled multicast |
| Safeguards | Filtering of MAC addresses Protection against DoS attacks |
| Management | Local configuration and software update via web browser Automatic remote service provisioning, device management and software updates via OMCI Information on the optical module Loop line test and circuit test Intelligent monitoring |
| IPv6 | IPv4/ IPv6 dual stack DS-Lite |
| Ethernet Features | VLAN filtering, VLAN transparent transmission VLAN N:1 aggregation VLAN 1:1 switch |
Product Description
| Technical Items | Descriptions |
|---|---|
| Model | HG8240R |
| Out Port Contains | 4FE+2TEL |
| WIFI Signal | NO |
| Wireless Gain | NO |
| USB | NO |
| LAN | 1*10/100Mbps adaptive Ethernet ports, full/half duplex, RJ45 interface |
| TEL | H248/Sip Voice protocol |
| PPPOE | Support |
| Firmware | English |
| Dimension/Weight | 190mm153mm28mm/313g |
| Fiber Port | 1 GPON/EPON/XPON interface, single-fiber, Downstream rate 2.5Gbps, Upstream rate 1.25Gbps |
| Wavelength | Tx 1310nm, Rx 1490nm |
| Fiber Interface | SC/FC-UPC/APC Dual mode/Single mode |
| RX Sensitivity | >-28dBm (1490nm) |
| DC Power | 12V 1A, external AC-DC power adapter |
| Button | Reset, Power |
| Operation | Working temperature: -5- +55℃, Working humidity: 10-90% (non-condensation) |
| Storage | Storage temperature: -30℃- +60℃, Storage humidity: 10-90% (non-condensation) |
Features
- Plug-and-play: Services can be deployed by one click on the NMS, and on-site configuration is not required.
- Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports, call emulation, and PPPoE dial-up emulation.
- Link monitoring: E2E link detection is achieved using 802.1ag Ethernet OAM.
- High-speed forwarding: 900 Mbit/s forwarding in the NAT scenario.
- IPv6 Capability: Support IPv6/IPv4 dual-stack and DS-Lite.
More Modules:
|
| Hg8247H5 |
