Product Description
Fiber optical Fusion Splicer is specially designed for FTTX/FTTH projects, it is handheld, could also be used for high works with the neck strap. It is with PAS digital core alignment technology, which has very stable performance and low fusion loss. It is easy to operate, could be used for naked fiber, drop cable, pigtails, patch cords etc. It is very economical and practical for your fiber optical network projects.
Features:
Small, light, long battery life
4 motors accurate core alignment
250 times magnification of fiber cores
7s fast splicing, 26s intelligent heating
More than 4000 times electrodes discharging
4400mAh Li-batery, 220 cycels splicing and heating
Inductive automatic heater, not heating without fibers
3 in 1 multi-function clamps, new waterproof structure
Apply to bare fibers, drop cables and jumper wires splicing
Specifications
| Applicable fiber | SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657) |
| Applicable fiber | SM(ITU-T G.652),MM(ITU-T G.651),DS(ITU-T G.653),NZDS(ITU-T G.655) |
| Diameter of cladding | 80 -150μm |
| Diameter of coating | 160 – 3000μm |
| Typical splice loss | SM:0.02dB, MM:0.01dB, DS:0.04dB, NZDS:0.04dB |
| Return loss | >60db |
| Fiber cleaved length | 10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm ) |
| Splicing program | 40 groups |
| Operate mode | Manual, Automatic |
| Auto-heating | Available |
| Typical splicing time | 7seconds |
| Tube heating time | 26 seconds for 60mm and 40mm shrinkable sleeves |
| Fiber view magnification | 320X(X or Y view), 160X(X and Y view) |
| Viewing method and display | 2 CMOS cameras, 4.3 inch color touch LCD monitor |
| Storage of splice result | 8000 results |
| Loss evaluation | Available |
| Tension test | 1.8-2.2N |
| Interface | GUI menu interface, easier operation |
| Battery capacity | 5200mAh Li-battery, typical 250 cycles(splice and tube heat) |
| Power supply | Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V |
| Electrode life | More than 4000 ARC discharges, can be replaced conveniently |
| Terminals | USB 2.0 port, for uploading splice results and upgrading software |
| Operating condition | Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10ºC~+50ºC;Wind speed: max 15m/s |
| Dimension | 200mm(L)x123mm(W)x95mm(H) |
| Weight | 1.6kg including battery |
| Package | Packed in carton with protection foam, Size 43cm*37cm*27cm, G.W.6.3kg |
For more: Click Here
