Huawei MA5800-X15 Description:
The OLT terminal provides access to GPON, 10G PON, including XG-PON and XGS-PON, and P2P 10GE/GE. It supports deployment in FTTH, FTTD, FTTB, and FTTC networks , and is applicable in scenarios such as home access, enterprise access, and wireless Internet access to combine all services into a single fiber network. The MA5800 functions as a high capacity aggregation device in the network.
By aggregating traffic from ONTs, MDUs and campus switches, it simplifies the network architecture.
Huawei SmartAX MA5800-X15 OLT Product Features
Huawei SmartAX MA5800 X15 OLT is widely recognized by operators as the FTT x network has advantages in full-service bearer, bandwidth upgrade and network maintenance. The global mainstream operators have begun to use FTTx networks for high-value enterprise customer access and mobile.
Huawei SmartAX MA5800 X15 OLT is designed to adapt to the trend of “flat capacity and less office” in the flattening of the network and the CO room. The new generation of OLTs needs to have the capability of access aggregation and integration to achieve “one fibre full service, unified-access layer”.
Huawei SmartAX MA5800 X15 OLT is a unified aggregation platform for the full-service fibre access network. The new-generation OLT needs to have high-reliability networking capabilities and support three high-reliability designs on the device side, line side, and network side. At the equipment layer, all components of the OLT are designed with dual backup redundancy to prevent single point of failure.
Specifications:
|
Item
|
MA5800-X17
|
MA5800-X15
|
MA5800-X7
|
MA5800-X2
|
|
Dimensions (W x D x H)
|
493 mm x 287 mm x 486 mm
|
442 mm x 287 mm x 486 mm
|
442 mm x 268.7 mm x 263.9 mm
|
442 mm x 268.7 mm x 88.1 mm
|
|
Switching Capacity of the System
|
7 Tbit/s
|
480 Gbit/s
|
||
|
Maximum Number of Ports in a Subrack
|
272 x GPON/EPON
|
240 x GPON/EPON
|
112 x GPON/EPON
|
32 x GPON/EPON
|
|
816 x GE/FE
|
720 x GE/FE
|
336 x GE/FE
|
96 x GE/FE
|
|
|
136 x 10G GPON/10G EPON
|
120 x 10G GPON/10G EPON
|
56 x 10G GPON/10G EPON
|
16 x 10G GPON/10G EPON
|
|
|
136 x 10G GE
|
120 x 10G GE
|
56 x 10G GE
|
16 x 10G GE
|
|
|
544 x E1
|
480 x E1
|
224 x E1
|
64 x E1
|
|
|
Ambient Temperature
|
-40°C to 65°C*
|
|||
|
*: The MA5800 can start up at a lowest temperature of -25°C and run at -40°C. The 65°C temperature refers to the highest
temperature measured at the air intake vent |
||||
|
Working Voltage Range
|
-38.4V DC to -72V DC
|
DC power supply:
|
||
|
-38.4V to -72V
|
||||
|
AC power supply:
|
||||
|
100V to 240V
|
||||
|
Layer 2 Features
|
VLAN + MAC forwarding, SVLAN + CVLAN forwarding, PPPoE+, and DHCP option82
|
|||
|
Layer 3 Features
|
Static route, RIP/RIPng, OSPF/OSPFv3, IS-IS, BGP/BGP4+, ARP, DHCP relay, and VRF
|
|||
|
MPLS & PWE3
|
MPLS LDP, MPLS RSVP-TE, MPLS OAM, MPLS BGP IP VPN, tunnel protection switching, TDM/ETH PWE3, and PW protection switching
|
|||
|
IPv6
|
IPv4/IPv6 dual stack, IPv6 L2 and L3 forwarding, and DHCPv6 relay
|
|||
|
Multicast
|
IGMP v2/v3, IGMP proxy/snooping, MLD v1/v2, MLD Proxy/Snooping, and VLAN-based IPTV multicast
|
|||
|
QoS
|
Traffic classification, priority processing, trTCM-based traffic policing, WRED, traffic shaping, HqoS, PQ/WRR/PQ + WRR, and ACL
|
|||
|
System Reliability
|
GPON type B/type C protection, 10G GPON type B protection, BFD, ERPS (G.8032), MSTP, intra-board and inter-board LAG, In-Service
Software Upgrade (ISSU) of the control board, 2 control boards and 2 power boards for redundancy protection, in-service board fault detection and rectification, and service overload control |
