WL108C EPON Product Description
WL108C EPON OLT device is mainly designed for small-scale network and special network construction, It supports at most 8 PON ports, 8 uplink combo ports. It is compliant with IEEE802.3-2005, China Telecom EPON technical requirements V3.0. It is deployed for FTTB or FTTH access network infrastructure to be used with ONU and ODN
Specifications of WL108C EPON:
Item
|
Specification
|
Data interface
|
8 PON port , 8GE WAN ethernet port
|
Management interface
|
1* 10/100Base-T RJ45 port. With management
|
Indicator light
|
RUN: system is running, ALM: system alarms, PWR: power indicator
|
PON1 – PON4 two indicator lights for each port show: PON port LINK status, and port protection
|
|
GE4 two indicator lights for each port show: Gibabit uplink port link status and running status
|
|
Power supply
|
AC 220V /1A or DC 48V
|
Weight
|
2.5kg
|
Storage temperature
|
0-55ºC
|
Dimension
|
175mm * 442mm*44mm
|
EPON standard
|
Compatible with IEEE802.3ah YD/T1475-2006 and CTC2.1standard
|
DBA
|
Support fixed bandwidth, guaranteed bandwidth, peak bandwidth, weight configurations and the minimum bandwidth allocation
|
Security
|
Support PON network and AES Triple stir encryption, support ONU MAC address binding and filtering
|
Multicast
|
Support IGMP Snooping and IGMP Proxy, support CTC
|
QoS
|
support 802.1p priority queue scheduling, supporting terminal to terminal QOS configuration
|
ACL
|
Support destination IP, source IP, destination MAC, source MAC, destination protocol port number, source protocol port number, SVLAN, DSCP, TOS, Ethernet type, IP protocol type, etc
|
Supports packet filtering rules based on the above
|
|
Support COS setting which base on above rules, IP priority setting, mirroring, rate limiting and port redirection
|
|
Flow control
|
Support IEEE 802.3x duplex flow control, port rate limiting
|
Alarm
|
Support alarm
|
Performance statistics
|
Support PON port and ONU UNI port 15 minutes performance statistics
|
NMS
|
supports local and remote CLI configuration
|
Main Features
1. 4 PON port access
2. 4 Combo Gigabit uplink services
3. Maximum support 128 ONTs (1:32 splitter)
4. Supports L2 exchange, L3 basic routing function, 200G switching broadband
5. Provide configuration for RS232 serial port (RJ45) and management for external network port
6. Support CLI command line
7. 32W typical power consumption
2. 4 Combo Gigabit uplink services
3. Maximum support 128 ONTs (1:32 splitter)
4. Supports L2 exchange, L3 basic routing function, 200G switching broadband
5. Provide configuration for RS232 serial port (RJ45) and management for external network port
6. Support CLI command line
7. 32W typical power consumption
Application
Data service function WL108C EPON
1. Support dynamic bandwidth allocation (DBA)
2. Support ONT MAC automatic binding and filtering.
3. Support Offline service configuration and service automatic deployment.
4. Support PON port isolation, support AEC encryption.
5. Support 4094 VLANs adding, transparent transmission and conversion, support VLAN stacking (QinQ).
6. Wire-speed support 16K MAC address learning and aging.
7. Support IGMP v1 / v2 Snooping and Proxy.
8. Support priority queue scheduling, support SP, WRR and SP + WRR algorithm.
9. Support port rate limiting, packet filtering support.
10. Support logs, alarms and performance statistics.
11. Support SNMP v1 / v2c network management.
2. Support ONT MAC automatic binding and filtering.
3. Support Offline service configuration and service automatic deployment.
4. Support PON port isolation, support AEC encryption.
5. Support 4094 VLANs adding, transparent transmission and conversion, support VLAN stacking (QinQ).
6. Wire-speed support 16K MAC address learning and aging.
7. Support IGMP v1 / v2 Snooping and Proxy.
8. Support priority queue scheduling, support SP, WRR and SP + WRR algorithm.
9. Support port rate limiting, packet filtering support.
10. Support logs, alarms and performance statistics.
11. Support SNMP v1 / v2c network management.