10G uplink ports EPON Product Description

10G uplink ports OLT device is mainly designed for small-scale network and special network construction, It supports at most 8 PON ports, 8 uplink combo ports. It is compliant with IEEE802.3-2005, China Telecom EPON technical requirements V3.0. It is deployed for FTTB or FTTH access network infrastructure to be used with ONU and ODN

Specifications:

Item
Specification
Data interface
8 PON port , 8GE WAN ethernet port
Management interface
1* 10/100Base-T RJ45 port. With management
Indicator light
RUN: system is running, ALM: system alarms, PWR: power indicator
PON1 – PON4 two indicator lights for each port show: PON port LINK status, and port protection
GE4 two indicator lights for each port show: Gibabit uplink port link status and running status
Power supply
AC 220V /1A or DC 48V
Weight
2.5kg
Storage temperature
0-55ºC
 Dimension
175mm * 442mm*44mm
EPON standard
Compatible with IEEE802.3ah YD/T1475-2006 and CTC2.1standard
DBA
Support fixed bandwidth, guaranteed bandwidth, peak bandwidth, weight configurations and the minimum bandwidth allocation
Security
Support PON network and AES Triple stir encryption, support ONU MAC address binding and filtering
Multicast
Support IGMP Snooping and IGMP Proxy, support CTC
QoS
support 802.1p priority queue scheduling, supporting terminal to terminal QOS configuration
ACL
Support destination IP, source IP, destination MAC, source MAC, destination protocol port number, source protocol port number, SVLAN, DSCP, TOS, Ethernet type, IP protocol type, etc
Supports packet filtering rules based on the above
Support COS setting which base on above rules, IP priority setting, mirroring, rate limiting and port redirection
Flow control
Support IEEE 802.3x duplex flow control, port rate limiting
Alarm
Support alarm
Performance statistics
Support PON port and ONU UNI port 15 minutes performance statistics
NMS
supports local and remote CLI configuration

Main Features of 10G uplink ports OLT

1. 4 PON port access
2. 4 Combo Gigabit uplink services
3. Maximum support 128 ONTs (1:32 splitter)
4. Supports L2 exchange, L3 basic routing function, 200G switching broadband
5. Provide configuration for RS232 serial port (RJ45) and management for external network port
6. Support CLI command line
7. 32W typical power consumption
Application

Data service function 10G uplink ports

1. Support dynamic bandwidth allocation (DBA)
2. Support ONT MAC automatic binding and filtering.
3. Support Offline service configuration and service automatic deployment.
4. Support PON port isolation, support AEC encryption.
5. Support 4094 VLANs adding, transparent transmission and conversion, support VLAN stacking (QinQ).
6. Wire-speed support 16K MAC address learning and aging.
7. Support IGMP v1 / v2 Snooping and Proxy.
8. Support priority queue scheduling, support SP, WRR and SP + WRR algorithm.
9. Support port rate limiting, packet filtering support.
10. Support logs, alarms and performance statistics.
11. Support SNMP v1 / v2c network management.

Reviews

There are no reviews yet.

Be the first to review “10G uplink ports High Quality FTTH EPON GPON”