Gigabit Ethernet Media Converter
This Media converter designed to convert 1000BASE-SX/LX fiber to 10/100/1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T standards, the MC220L communicates with any TP-Link standard gigabit SFP fiber module.
- Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
- Wave Length Depends on the used SFP module
- LED Indicators PWR, Link/Act
- Max Power Consumption 1.7 W
Fiber Media Converter 10/100/1000Base-Tx To 1000Base-Fx With 1 Fiber Port + RJ45 Ports
Provide one SC fiber connector and Two UTP connector
Fully Complies with IEEE802.3 10Base-T,IEEE802.3u 100Base-TX/IEEE802.3u 100Base-FX,IEEE802.3z 1000Base-FX Standard.
- Auto-detection of half/full duplex transfer mode for Tx port
- Auto-negotiation of 10/100/1000Mbps rate and Auto-MDI/MDIX for Tx port
- Provide switch configuration of half/full duplex transfer mode for Fx port
- Extend fiber distance up to 20km for single-mode fiber
Specification’s
| Feature | IEEE802.3 10BASE-T Ethernet | IEEE802.3u 100BASE-TX/FX Fast-Ethernet | IEEE802.3z/ab 1000BASE-FX/TX 100M-Ethernet | IEEE802.3x |
|---|---|---|---|---|
| RJ-45 Port | Auto-MDI/MDIX | Auto-MDI/MDIX | Auto-MDI/MDIX | |
| Fiber Port | SC | |||
| Fiber Type | 1310/1550nm | |||
| Wavelength | 20dBm(min.) to 0dBm(max.) | |||
| Frequency Offset | ±125,000bps (or ±100ppm) | |||
| MTU | More than 9036 bytes | More than 9036 bytes | More than 9036 bytes | |
| Dimensions (WxDxH) | 94x71x27mm (External power) | 94x71x27mm (External power) | 94x71x27mm (External power) | |
| Input Voltage | DC5V1A (External power input: AC100V-AC240V/50-60HZ) | DC5V1A (External power input: AC100V-AC240V/50-60HZ) | DC5V1A (External power input: AC100V-AC240V/50-60HZ) | |
| Operation Temperature | 0°C~70°C | 0°C~70°C | 0°C~70°C | |
| Store Temperature | -40°C~85°C | -40°C~85°C | -40°C~85°C | |
| Humidity | 5%~95% non-condensing | 5%~95% non-condensing | 5%~95% non-condensing | |
| Weight | 0.3kg/Piece (External Power) | 0.3kg/Piece (External Power) | 0.3kg/Piece (External Power) |
Features
- Duplex Mode: Full-DX/Half-DX Auto-neg.
- UTP Ports: RJ-45 UTP
- Fibre Ports: SC (Multimode)
- LED Indicators: TX & FX, FP-LINK 1000M,PWR,DVP
- Power Requirement: 1A@ +5V/DC
- External power supply
- Ambient Temperature: 0~60≦
- Humidity: 5%~90%
- Dimensions: 95mm(W) x 70mm(D) x 26mm(H)
- FCC Part 15 Class B, CE Mark & C-Tick
- Standards
- IEEE802.3UI
- 10/100Base-TX and 100Base-FX
- Australian Standards Approved Power Supply
For more: Click here
Reviews
There are no reviews yet.