- Model Number:WOR-SG411P-SFP
- Type:Fiber optic media converter
- Place of Origin:Guangdong, China
- Use:CCTV ,IP Camera
- Warranty Time:1 year
- Network:Wired LAN, Ip, POE
- Product name:4 Port 10/100/1000Mbps POE Switch + 1 SFP fiber port
- PoE Ports:4
- Uplink Ports:1
- Max Transmission Distance:100m
- Total Power Budget:65/96W
- Warranty:1 Years
- Place of original:China
- Brand:Wanglink, OEM
- Selling Units:Single item
- Single package size: 35X20X15 cm
- Single gross weight:1.500 kg
- Package Type:Original packaging
- Lead time:Quantity(pieces)1 – 100101 – 1000>1000Lead time (days)715To be negotiated
Smart POE Switch Gigabit 4 Port + 1 Port Uplink + 1 SFP Slot Fiber Switch Support AI and 6KV Lightning Protection For NVR CCTV
Product Description :
This PoE switch has 4 10/100/1000Base-T Ethernet ports and 1 1000Base-X SFP slot, of which port 1-4 support IEEE802.3 af/at PoE(Power over Ethernet) protocol power supply. The maximum power supported by a single PoE port is 25.4W, and the maximum PoE output power that the whole machine can provide is 96W; This is a standard PoE protocol switch, which can automatically detect whether the powered device supports PoE power supply, and it only provide the power to the same PoE protocol PD devices, it can effectively prevent damage to non-PoE powered devices.The PoE switch can force the port 1-4 transmission rate to be reduced to 10mbps through the DIP switch, and then this will be able to transmit a maximum distance of 250m through the existing twisted pair.At the same time, the port 1-4 are in a state of mutual network isolation, but they can communicate with the uplink ports (5-6) respectively.It can effectively isolate the conflict domain and broadcast domain, reduce the generation of broadcast storms, and improve the efficiency of network communication. It is an ideal choice for video surveillance networking in hotels, shops, supermarkets, family homes and small and medium-sized enterprises.
Features:
Protocol
|
Standard
|
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-SX/LX standards IEEE802.1W Spanning Tree IEEE 802.3x flow control |
Fiber Port Characteristic
|
Connector Type
|
SFP slot
|
|
Transmission rate
|
1.25Gbps
|
|
Transmission distance
|
Multi-mode: 550m/2km;
Single-mode: 2/20/40/60/80/100km |
|
Wavelength
|
Multi-mode:850nm/1310nm,
Single-mode:1310nm/1550nm/1490nm |
Ethernet port
Characteristic
|
Connector Type
|
1×4 RJ45,1×1 RJ45
|
|
Transmission rate
|
10/100/1000Mbps auto-negotiate
|
|
Transmission distance
|
10Base-T: ≤250m(CAT3,4,5 UTP)
100Base-TX: ≤100m(CAT3,4,5 UTP) 1000Base-T: ≤100m(CAT3,4,5 UTP) |
Exchange performance
|
Forward method
|
Store-and-forward(full wire-speed)
|
|
Transmission mode
|
Half/Full duplex adaptive
|
|
MAC address table
|
2K
|
|
Case space
|
1Mb
|
|
Jumbo frames
|
9216b
|
|
Packet Forwarding Rate
|
8.928Mpps@64byte
|
|
Bandwidth
|
12G(non-blocking)
|
LED indicator
|
Power indicator
|
Green, PWR
|
SFP port indicator
|
Green, SFP slot
|
|
Link/Act indicator
|
Yellow, 1 for each ethernet port
|
|
1000M indicator
|
Green, 1 for uplink port 5
|
|
PoE indicator
|
Green, 1 for each PoE port
|
|
Power parameters
|
Input voltage
|
AC100~240V, 50Hz
|
Power consumption
|
Standby: ≤2W; whole: ≤96W
|
|
PoE pin
|
1/2+,3/6-
|
|
The port max rate
|
≤25.4W
|
|
Environment
|
Operating Temperature
|
-20℃~60℃
|
Storage Temperature:
|
-40℃~85℃
|
|
Operating Humidity
|
5%~95% non-condensing
|
|
Heat dissipation method
|
Natural heat dissipation
|
|
Physical properties
|
Size
|
201×140×44mm
|
Weight
|
Net weight:0.7kg,Gross weight: 0.9kg
|